The Air Cooler Maintenance Platform Assembly is a structural access system for industrial air-cooled heat exchangers. It combines steel platforms, supporting beams, bracing members and access ladders to provide maintenance access around the air cooler structure.
Shandong Jiuyuan Engineering Equipment Co., Ltd. manufactures air cooler structural assemblies using carbon steel sections and welded or bolted construction. Platform dimensions, support arrangements and connection details are designed according to equipment layouts, structural drawings and project load conditions.
Technical Specifications
| Parameter | Specification |
|---|---|
| Main Structural Material | Carbon Steel Structural Sections |
| Alternative Materials | Duplex Stainless Steel / High-Strength Structural Steel |
| Main Structural Members | Columns, Beams and Bracing Members |
| Structural Arrangement | Spatial Rigid Frame |
| Bracing Configuration | Triangular or K-Shaped Bracing |
| Connection Type | Welded or Bolted |
| Platform Components | Maintenance Platforms, Walkways and Stair Platforms |
| Access Components | Maintenance Ladders |
| Design Load Conditions | Equipment Dead Load, Operational Load, Wind Load, Snow Load, Seismic Load and Dynamic Maintenance Load |
| Hot-Dip Galvanizing Thickness | Normally 70–100 μm |
| Enhanced Galvanizing Thickness | Over 120 μm, depending on corrosion conditions |
| Marine Surface Protection | Thermal Spray Aluminum (TSA) with Sealing Layer or Heavy-Duty Epoxy-Fluorocarbon Coating |
| Fabrication | Cutting, Welding, Drilling and Structural Prefabrication |
| Installation | Whole or Sectional Delivery with Bolted Site Connections |
Platform dimensions, design loads, steel section sizes and connection details are determined by the approved project drawings and structural calculations.
Structural Design and Platform Configuration
The Air Cooler Maintenance Platform Assembly is integrated into the supporting air cooler steel structure. Its main structural arrangement uses steel sections, including beams and supporting members, with bracing configurations selected according to the required structural stability.
The platform system can incorporate:
- Maintenance platforms for equipment inspection
- Walkways connecting designated maintenance positions
- Stair platforms and access ladders
- Supporting beams and structural connections
- Bracing members for the supporting framework
Welded and bolted connections can be used according to fabrication requirements and site assembly conditions. Structural members can be prefabricated in the workshop and delivered as complete sections or separate components for installation.
Material and Corrosion Protection
Carbon steel structural sections provide a practical material option for conventional industrial air cooler installations. The material offers good strength and fabrication characteristics, allowing welded construction, bolted assembly and subsequent structural modifications.
For outdoor installations and environments with greater corrosion exposure, surface protection can be specified according to the project conditions.
Hot-Dip Galvanized Steel
The hot-dip galvanizing process forms a zinc-iron alloy layer and an outer zinc layer on carbon steel profiles. The normal coating thickness is 70–100 μm, with thickness increased to over 120 μm when required by the environmental corrosion level.
Marine and Coastal Protection
For offshore platforms and coastal industrial installations, protective systems can include thermal spray aluminum with a sealing layer or heavy-duty epoxy-fluorocarbon coatings. Duplex stainless steel and high-strength structural steel with enhanced protective coatings can also be considered for the main structural members.
The material and coating system are selected according to the actual exposure conditions, rather than applying one surface treatment to every installation.
Structural Load and Project Customization
Each Air Cooler Maintenance Platform Assembly is designed around the equipment arrangement and structural requirements of the project.
The structural design considers:
- Equipment dead weight and operating loads
- Wind and snow loads
- Seismic loads
- Dynamic loads generated by maintenance activities
- Connections between the platform and supporting steel structure
We provide non-standard structural design based on customer-supplied general arrangement drawings and load conditions.
Customization can cover platform dimensions, installation elevations, access positions, supporting member arrangements, bracing configurations and connection details. The final structural dimensions and design load capacity are established through project-specific engineering calculations.
Manufacturing and Quality Inspection
Our manufacturing operations cover air-cooled heat exchangers and related steel structural components.
Available manufacturing equipment includes CNC cutting machines, laser cutting machines, beveling machines, automatic welding machines and CNC drilling machines. These processes support the fabrication of structural steel members and prefabricated air cooler assemblies.
Inspection requirements can be coordinated with the project specification, including dimensional checks and applicable non-destructive testing methods such as RT, UT, MT and PT.
Structural components can be prepared for sectional transportation and bolted site assembly, with fabrication and inspection arrangements coordinated according to the approved drawings.
Request a Quotation
For an Air Cooler Maintenance Platform Assembly quotation, send us your air cooler general arrangement drawing, structural layout or existing equipment photographs.
Please include the required platform locations, installation elevations, design load conditions and preferred material or corrosion protection requirements if available.
Our engineering team can review the structural configuration and prepare a project-based proposal for your maintenance platform assembly.
Hot Tags: air cooler maintenance platform assembly, China air cooler maintenance platform assembly manufacturers, suppliers, factory

