Air Cooler Equipment Support Base

Air Cooler Equipment Support Base

Our Air Cooler Equipment Support Base is a structural steel support assembly designed for industrial air-cooled heat exchanger installations. It provides a supporting structure for air cooler equipment and transfers equipment loads through the supporting members to the designated installation foundation.
Share to
Send Inquiry
Description
Technical Parameters

Structural Support for Industrial Air Cooler Installations

Our Air Cooler Equipment Support Base is a structural steel support assembly designed for industrial air-cooled heat exchanger installations. It provides a supporting structure for air cooler equipment and transfers equipment loads through the supporting members to the designated installation foundation.

Manufactured using structural steel sections, the support base can adopt welded or bolted construction. Carbon steel is available for conventional industrial installations, while hot-dip galvanized protection can be selected for projects requiring enhanced corrosion protection.

Structural Design and Configuration

The carbon steel air cooler support structure is manufactured using structural steel members arranged according to the equipment layout and project design requirements.

Its configuration can include columns, beams and diagonal bracing members. Depending on the required structural arrangement, triangular or K-shaped bracing can be incorporated to improve overall frame stability.

Structural Feature Configuration
Main material Carbon steel
Structural members Steel sections, columns, beams and bracings
Structural arrangement Spatial rigid-frame structure
Bracing configuration Triangular or K-shaped diagonal bracing
Assembly method Welded or bolted connections
Surface protection Protective coating or hot-dip galvanizing

Material and Surface Protection Options

Carbon steel is a practical material choice for industrial air cooler support structures. It offers good strength and fabrication performance and allows welded or bolted structural construction.

For projects requiring additional corrosion protection, hot-dip galvanized air cooler support base construction is available. The treatment forms a zinc-iron alloy layer and an outer zinc layer over the carbon steel substrate.

Parameter Specification
Standard material option Carbon steel
Alternative protection Hot-dip galvanized carbon steel
Typical galvanized coating thickness 70–100 μm
Enhanced coating thickness Above 120 μm, depending on corrosion conditions
Alternative surface protection Protective anti-corrosion coating

Hot-dip galvanized structures are suitable for wet and mildly corrosive industrial environments, including chemical plants and nearshore industrial facilities. They are not suitable for prolonged exposure to strong acids or alkalis or operating conditions above 200°C. A suitable high-temperature protective coating system should be considered for those conditions.

Load Conditions and Structural Requirements

The support base must be designed around the actual equipment configuration and installation conditions. Structural calculations should account for the loads transmitted from the supported equipment and the environmental forces acting on the structure.

Load Category Design Consideration
Equipment dead load Self-weight of the supported equipment
Operational load Loads generated during normal equipment operation
Wind load Wind forces acting on the installed structure
Snow load Snow accumulation according to site conditions
Seismic load Seismic requirements applicable to the installation site
Dynamic load Vibration and dynamic forces generated by fan operation
Maintenance load Loads associated with inspection and maintenance activities

The required structural dimensions, steel section sizes, plate thicknesses and connection details are determined by the project design and specified loading conditions. Actual load capacity must be established through the corresponding structural calculations rather than assumed from the material selection alone.

Custom Fabrication and Connection Arrangements

We provide custom air cooler support base fabrication based on customer general arrangement drawings and load conditions.

The support base can be configured according to the required equipment dimensions and installation layout, including:

  • Overall structural dimensions and member arrangement.
  • Steel section selection and member thickness.
  • Column, beam and diagonal bracing configuration.
  • Welded or bolted connection arrangements.
  • Installation interface and connection positions.
  • Protective coating or hot-dip galvanized surface treatment.

Structural members can be prefabricated in the factory and supplied as complete assemblies or separate sections for site assembly, depending on transportation and installation requirements.

Manufacturing and Quality Control

Shandong Jiuyuan Engineering Equipment Co., Ltd. provides industrial equipment and steel structural fabrication services.

Our manufacturing facilities are equipped with CNC cutting machines, laser cutting machines, beveling machines, submerged arc automatic welding machines, plasma automatic welding machines and CNC drilling machines.

The available inspection equipment includes RT, UT, MT and PT non-destructive testing equipment.

These manufacturing and inspection resources support structural component processing, welding and project-specific quality inspection requirements. Inspection scope and acceptance criteria are established according to the applicable project specifications.

Request a Quotation for Your Air Cooler Support Base

Send us your air cooler general arrangement drawing, equipment weight, design load conditions and required quantity.

Our engineering team can review the structural configuration, material selection, connection arrangement and surface protection requirements to prepare a project-specific proposal and quotation.

Contact Shandong Jiuyuan Engineering Equipment Co., Ltd. for your Air Cooler Equipment Support Base requirements.

Send Inquiry

Email: zhaobf@shandongjiuyuan.com

Tel: +86 152 6313 5060

Hot Tags: air cooler equipment support base, China air cooler equipment support base manufacturers, suppliers, factory

Send Inquiry
Send Inquiry